Installation - Notes
Installation
This information is intended for the installer, as the per-
son responsible for assembly and electrical connection. If
you install the oven yourself, the manufacturer will not
be held responsible for any possible damage.
Before Installation.
An aperture is required in the kitchen unit to a mini-
mum depth of 560mm.
To fit the oven into this location, the back part of the
unit must be clear of projections (reinforcements,
pipes, sockets etc.)
Always ensure that this appliance is connected by a
competent electrical installer who is a member of a
recognised ‘competent persons’ scheme and whi will
comply with the I.E.E. and local regulations.
Before you start
Always make sure that you have carefully read through
the installation pages of this book - careful planning at
the beginning will ensure a quick and easy installation.
Take care when moving this appliance, it may be heav-
ier than it looks! If you need to lift the appliance, make
sure you use an appropriate lifting method.
Soft, or uneven flooring may be damaged unless the
appliance is moved with care.
DO NOT attempt to move the oven by pulling on the
handles or doors, we recommend that you open the
door and grasp the frame of the cooker. Please wear
protective gloves for this, and make sure the door can-
not trap your fingers.
Please make sure that you have enough space for your
appliance, use the table and diagrams shown to help
determine this.
After connecting the elec-
tricity, check that all the
electrical parts of the
oven are working.
i
Installation must only be
performed by a fully qual-
ified electrician who must
ensure regulations in
force for installation are
observed.
!!
!
Warning:
This appliance must be
earthed
!!
!
31