Installation – Under A Worktop (cont.)
Installation into a cabinet
It is possible to fit this appliance into a 600mm wide cabi-
net, although the changes that would have to be made
are significant and we would therefore recommend instala-
tion
between cabinets.
If you want to install into a 600mm wide cabinet, the fol-
lowing procedure needs to be followed.
1. Secure the existing cabinet sides to the adjoining cabi-
nets, the gap between the cabinet sides needs to be 558
- 568mm.
2. Remove any cross members at the top of the cabinet.
3. Remove the bottom shelf and add the two metal brack-
ets to the cabinet sides, with the long edge protrouding
out, at a distance of 720mm below the work top (see
FIG 1)
4. The appliance is slid into position on the two metal
brackets and secured to the cabinet sides using the
screws provided.
Please note that all sizes are nominal and some variation
is to be expected.
35