Installing Your Cooker
Stabilising and Securing
Your cooker may come with a stability chain, if it does not
we recommend that you buy a stability bracket from your
local supplier, this will keep the cooker from moving and
will prevent damage to the flexible hosing at the back of
the cooker.
Your stability chain
Your cooker must be secured to a wall or a solid partition
behind the cooker.
Your stability bracket
You can buy a stability bracket from your supplier and it
can fitted as follows:
Place the cooker in position and draw a pencil line level
with the front edge.
Remove the cooker and mark off 450mm from the
pencil line to locate the front edge of the lower
bracket.
Fix the bracket to the floor. Measure from floor level
to engagement edge in the back of the cooker and add
3mm.
Assemble the underside of the top part of the bracket
to this height.
See the drawings for the location of the bracket and
the recommended positioning.
Leveling
Once your cooker is secure:
Place a spirit level onto a baking tray, on an oven shelf.
These cookers are fitted with leveling feet and lock nuts
at the front, and adjustable wheels at the rear. The
wheel height can be adjusted using a screwdriver via the
hexagonal hole in the front plinth.
Stability Hook
(not supplied)
Rear of cooker
Firmly fix chain
to cooker rear
Stability chain to
be as short as
possible
Cooker stability chain not designed
with bracket engagement slot
Gas inlet pipe
Centre of appliance
Model viewed from rear
Locate stability bracket here
X
Rear
plinths
Back panels
Rear feet and
wheels
39