7
You can increase the seat width by
moving out the armrests using the
widening kit. You can choose to
increase the seat width by 5 or 10 cm.
Step 1
Loosen the armrests on each side by
unscrewing its two brackets.
Step 2
Fit the widening sleeve between the
chair and the armrest. Reinstall the
armrests.
You buy the widening kit where
you bought your Eloflex.
Change the seat width
Turn off the power wheelchair with the
joystick. Then push the red levers on
the motors (see picture) to disconnect
the magnetic brakes. In this position,
the chair can be rolled manually.
Note!
If the user uses the chair without
assistance, the magnetic lock of the
chair must always be switched on.
Manual driving
ON
OFF
IMPORTANT!
NEVER kick on the red
levers with your foot.
Only use your hands.
Anti-tip device
For safe driving, the anti-tip devices
must always be in their outer position.
1.
Loosen the thumbscrew.
2.
Pull out the anti-tip device.
3.
Tighten the thumbscrew.
NOTE!
The anti-tip devices must
always be extended when using
the chair.
1
2
F
P
D2
L
H
X
F
P
D2
L
H
X
F
P
D2
L
H
X
1
2