RENEWABLE COVER REPLACEMENT
If the renewable cover (2) becomes worn or cracked, follow the steps below
to replace it.
1. Disassemble the renewable cover (2) by loosening and removing the six cover screws (4) (not shown).
2. Lift the body (1) free of the cover (2). Remove the ratchet assembly hinge (3), ratchet (5), and ratchet
spring pin (13).
3. lnstall the body (1) and ratchet assembly-hinge (3) ratchet (5), ratchet spring (13) and spring pin (14) in the
new renewable cover (2). Reinstall the six cover screws (4) (not shown).
RUBBER COVER - BLACK
RUBBER COVER - RED
RUBBER COVER - WHITE
Assembly Instructions
HYDRO-PRO 150
®
WATER-SAVER SPRAY NOZZLE
WDEHP150062020
A C
ER
TIFI
ED QUALITY PRODU
CT
• A
C
ER
TIF
IED
Q
UA
LITY
PRO
DUC
T •
A
C
ERT
IFIE
D Q
UA
LIT
Y
PR
O
DU
CT
•
1 YEAR
LIMITED
WARRANTY
ESTABLISHED 1921
STRAHMANVALVES.COM
WORLD HEADQUARTERS
STRAHMAN VALVES, INC.
2801 BAGLYOS CIRCLE, BETHLEHEM, PA 18020
P: +1 484.893.5080 F: +1 484.893.5099 E: STRAHMAN@STRAHMAN.COM
U N I T E D S T A T E S • F R A N C E • G E R M A N Y • C H I N A • H O N G K O N G
