issue V8.3E from
01.07.2019
8
3.3
Connecting the distributor and the vacuum lines
Note: To disassemble the system, the instructions of chapter 3.3 to 3.1
have to be executed in reversed order!
distributor
support arm
attach the distributor at the arm
When attaching the distributor a
clicking
must be heard. Only in that case the
distributor is attached securely.
Note: With excessive pulling of the
distributor he becomes separated from
the support arm, in order to protect
the construction against to large lever
forces.
Plug in the vacuum lines into the delta distributor sockets as indicated by the codes.
Attach the plug-in brackets.
The patient´s cable is led with the help of the plug-in brackets along the support arm.
Fix the clips for
cable adjustment
on the profile rails.
