(II) Getting Started
1.
After receiving electrify source , computerautomatically start up, unplug the computer shutdown, no
switch on and switch off button;Power input voltage is 100-240 - VAC 50/60 HZ, power output voltage is
12 v, 5 A
2. Button function
1. Main menu button: return to use desktop after pressing main menu button.
2. Volume button: press(+)button,increase the volume;press (-)button, decrease volume.
3. Brightness adjustment: press brightness (+) ,increase the screen brightness; press brightness
(-),decrease screen brightness.
4. Memory card application
1
、
Insert memory card
：
Insert memory card to slot, use finger press the card into the slot until hear “click”. The right corner in
the screen will reminde: preparing the SD card. When install the memory card successfully, this reminder
will disappear.
2
、
Browse memory card file
：
Enter the file manager, choose SD card in equipment list, enter the root directory, begin to browse the
file in the SD card.
3
、
Pull out memory card
：
Click the menu button, enter the setup, enter the SD card and equipment memory setting, and click
“remove the SD card”, system will reminder “SD card removed successfully”; press card slightly, and
harf of card will pop up , then take it out.
5. Use of USB port
Totally three USB ports, USB2.0 port can support USB2.0 and backward compatibility. USB2.0 s
ervice port used for programming. When insert U disk, keyboard and mouse, the right corner of
screen will reminde: preparing the SD card. SD card installed successfully, this reminderwill dis
appear.
6
.This product support HDMI HD output, HD video can be output to the TV display devices etcthrough
the HDMI .
7.
Virtual keyboard and Input
1. Click any Input Box
2. The virtual keyboard pop up at bottom
3. Press input box for 3 seconds to switch the pop-up input options
4. Click "go" to determine when input is complete
8.
Connect Network with WiFi
1. Click "Menu" button
2. Select "Wireless and network"
3. Click on check "WI-FI" option to turned on or off the WIFI network (please select On)
4. Click to enter "WI-FI Settings" option and searched WI-FI networks are displayed,then click the
known "Wireless AP" name to connect and possible password is required.
9. FAQ
1. Can’t start the device. Plug the power again. If it still doesn’t work, then it might be the problem
