Setup Guide
P 6 / 16
Configuring the X2O Media Player
Note: Steps 1 to 5 are optional.
If you prefer to leave the default Android settings (time zone, device
name, etc.), you can go directly to
the “
section.
1.
Go to the Android
Settings
page to configure the player.
To reach the Android Settings page, perform the following steps:
a.
On the top-right corner of the
Activation
screen, click the X2O logo five times to turn off
Kiosk Mode. A message appears temporarily to indicate that Kiosk Mode is disabled, and the
Android bars and navigation buttons become available for selection: