CleanStation™ CSIIP Installation Guide
DOC-03204 Rev. B
11
3.3 Connecting the Water Supply and Drainage Hoses
To connect the water supply hose:
1. Attach the supply hose to the SUPPLY inlet.
2. Attach the other end of the hose to the facilities tap.
To connect the drainage hose:
3. Attach the drain hose to the DRAIN outlet.
4. Attach the other end of the hose to a drain, according to local waste disposal
regulations.
Caution:
When the selector switch (on the operator panel) is set to DRAIN TANK
and the CONTROL VALVE is set to DRAIN TANK, high pressure can
cause the drain hose to be freed from the drain if it is not properly secured.
Make sure that the drain hose is securely attached to the drain.
Figure 10 Water connection diagram
