CleanStation™ CSIIP Installation Guide
DOC-03204 Rev. B
12
3.4 Attaching a Plug to the Power Cable (for 220 V Units)
It is the customer’s responsibility to ensure that the power connector is prepared by personnel
qualified by local authorities.
The CleanStation™ CSIIP unit is shipped with one of the following:
•
for 90-120 VAC:
a power cable, including a NEMA 5-15 (Type B) plug
suitable for the USA. For regions with this voltage that use a different type of
plug, the customer must provide a plug that meets local requirements and
have it installed by personnel qualified by local authorities.
•
for 220-240 VAC:
a 14 AWG power cable, with no plug attached. For these
areas, the customer must provide a plug that meets local requirements and
have it installed by personnel qualified by local authorities.
If necessary, attach the power plug required by local authorities.
Figure 11 Schematic diagram of 220 V power cable
