CleanStation CSIIP Site Preparation Guide
DOC-03202 Rev. A
5
2 Shipment and Delivery
2.1 Shipping Information and Responsibility
Stratasys Ltd. will arrange shipment to the customer’s facility, as indicated in the
“ship to” section of the invoice. It is the customer’s responsibility to provide
Stratasys with detailed delivery instructions. The customer is also responsible for
transporting the system to a suitably prepared installation location.
Upon request, customer support engineers will provide advice regarding these
matters.
Equipment should be unpacked and installed in the presence of authorized
Stratasys representatives.
2.2 Shipping Size and Weight
The CSIIP is shipped in a shipping box on a wooden pallet. The following table
provides the approximate size and weight as shipped:
Table 1 CSIIP shipping size and weight
W x H x D (cm)
W x H x D (in)
Weight
109 x 127 x 94
43 x 50 x 37
156.5 kg / 345 lbs
2.3 Lifting Equipment
A forklift or hand pallet truck with the following specifications is required:
• Lifting capacity of 200 kg (440 lb)
• 90-centimeter (36-inch) extension
2.4 Unloading
It is the customer’s responsibility to determine what type of truck is required to
deliver the CSIIP, based on whether or not there is a loading dock at the site.
The unloading area should be a level surface.
• A receiving area of 10 m
2
(108 sq ft) is required for the forklift to remove the
CSIIP from the delivery truck.
• A clearance of 180 cm (6 ft) from all sides of the packaging is required for
unloading the CSIIP from the pallet.
• The installation location must be accessible from the unloading area. The
customer is responsible for unloading the CSIIP from the truck and
transferring it to the installation location.
