EZI-FENCE POST PACK INSTALLATION
If you choose to use the Ezi-Fence post pack for your fence
run, you will need to space the posts at 74” centers as shown
in the diagram below.
CUSTOM POST SPACING INSTALLATION
If you will be installing the panel between custom posts or
an existing structure, you will need to cut the fence railing to
suit the opening using a drop saw with an aluminum cutting
blade.
The length of the fence railing, which is the final panel width,
is calculated using the following formula.
Railing length = Opening minus 1”.
GATE
Standard gate is 48 3/8” x 37 3/8“ (H x W), with the dimensions
being outer edge to outer edge.
*Please refer to your hinge kit details for gate opening
allowances.
EZI-FENCE INSTALLATION DETAILS
74” Post Centers
72” Gap
46 3⁄4”
Bracket
Centers
EZI-FENCE RAKING
The Ez-Fence can be installed on sloping ground on an
angle up to 12°.
48 3⁄8”
3’ 13⁄8”
BASE PLATE INSTALLATION
If you choose to use the Ezi-Fence Post Pack on existing
pavement or decking, a Base Plate Kit is required for each
post.
First attach the base plate to the post using the 4 screws
provided.
The base plate and post assembly is then secured to the
ground using suitable fixings.
Opening
Opening minus 1”
Existing
Structure
Opening
Custom Post Spacing
Opening minus 1”
Post
Bracket
#8 Wafer Head
Screws
Existing Wall
Bracket
Suitable
Fixings
EZI-FENCE BRACKETS
The Ez-Fence can be installed easily to posts or existing
structures.
Use the screws provided in the Bracket Kit to fix the brackets
to Ezi-Fence posts at 46 3/4” centers (this distance will need
to be modified accordingly if a custom height panel is used).
For existing structures use fixings that are suitable for the
material you are attaching the bracket to.
Maximum 12° angle
Screws
Base Plate
Post
Pavement/Decking
Post Assembly
Suitable Fixings
Screws supplied
in Bracket Kit
Ezi-Fence Panel
The Ezi-Fence Panel is then attached to the brackets
through the top and bottom rails using the self drilling
screws provided.
