-11-
3)
You will see a contracted screen with a blue border. Use the Arrow keys to sideways,
and ENTER to select whether to MOVE, ZOOM, or FOCUS the camera. (note: Focusing
is currently not available on the SG7380 Dome camera).
4)
Enter Pan/Tilt Zoom mode by holding the PAN/TILT key on the monitor for 3 seconds, or
press the Pan/Tilt button on the remote control;
5)
If you have selected MOVE, you can use all four arrow keys to Pan and Tilt in all
directions. If you selected ZOOM or FOCUS, use the
▲▼
arrow keys to Zoom / Focus IN
/ OUT.
6)
Select and press ENTER on the EXIT option to escape Pan/Tilt mode.
Note: The system automatically exits Pan/Tilt mode after 20 seconds of inactivity.
When the PTZ camera is active the external alarm function on channel 1 will
be disabled, but the internal pixel motion alarm will function
Refer to the diagram below for an illustration of Pan/Tilt Zoom mode.
[CH1 PAN/TILT MODE]
MOVE
ZOOM
FOCUS
EXIT
