The BC1 supports 2 x 3.5" or 2 x 2.5" drives which mount
vertically to the underside of the main body using the 6#32 for
3.5" drives or M3 thumbscrews for 2.5" drives.
Fitting hard drives & standoffs to the main body
Note that threaded standoffs can also be used instead of
pushpin ones or in combination and require M3 screw in
order to lock the motherboard more securely for permanent
setups.
In preparation for fitting the motherboard and PCI cards,
standoffs must be fitted to the upper surface of the main body.
Depending on what size motherboard and how many cards
are being installed, use the correct number of standoffs in the
matching locations. The motherboard uses pushpin or
threaded standoffs whilst the PCI card supports require
threaded standoffs.
4
mITX
mATX
ATX
PCI card
mounting holes
Motherboard
mounting holes
2.5" Drive
3.5" Drive
Pushpin or threaded standoff
Threaded standoff
