Using the side brackets
The washers supplied with the BC1 should be placed between the
bracket and table to avoid surface damage.
The hbracket assembly can then be screwed to the side
of the table using the M3 thumbscrews. The mounting holes are
located along all 4 sides of the main body with brackets that are
designed to pivot in order to fit different hole spacings. These
include those used by 120mm, 140mm, and 240mm cooling fans.
The BC1 includes 4 side brackets which can be used for fixing
radiators, fans and virtually anything else that has a screw hole
mounting to the table. The brackets should first be fitted to the
hardware which you plan to mount using either screws that are
supplied with the hardware or the thumbscrews supplied with the
BC1. The bracket orientation is reversible, so choose between the
thick or thin side according to the length of the screw used to attach
the hardware.
6
240mm
Washer
140mm
Bracket
