Cable routing is not shown, but this should be considered whilst planning the build and applied
accordingly.
To disassemble the BC1 simply reverse the procedure and when packing the screws and parts
ensure you replace them in the correct location, especially the M3 and 6#32 thumbscrews.
Most of these steps can be performed in any order and this guide is simply an overview of the
general procedure. It also demonstrates how parts can be used but as this is an open platform
designed for flexibility, there are multiple variations which are not shown.
When removing the motherboard make sure to pry it away carefully from the pushpin standoffs
to ensure no damage occurs.
Final notes
7
COPYRIGHT NOTICE
Copyright © 2018 All Rights Reserved. No part of this publication may be reproduced, stored in a
retrieval system, or transmitted, in any form or in any means – by electronic, mechanical,
photocopying, recording or otherwise – without prior written permission. All trademarks and
registered trademarks in this publication are the property of their respective owners.
