Troubleshooting
Make sure that before pressing the record button the input source is
turned on and is providing an audio signal to iRecord Music.
Make sure that the audio cables are securely connected to both the
input source and iRecord Music.
If status LED does not illuminate within 15 seconds after power up, do
a power cycle again, i.e. turn off iRecord Music, wait 10 seconds
and turn on iRecord Music.
If your iPhone, iPod, PSP or USB storage device is not recognized by
iRecord Music after 30 seconds (status LED does not turn solid GREEN)
try the following steps:
1. Remove and re-insert iPhone, iPod, PSP or USB device.
2. Reset iPod. (Please see your iPod user manual)
3. Make sure PSP is in USB mode. Newer PSP models automatically
Go to USB mode when connected to iRecord Music.
13
Page 19