Lisa LCD
20
M y s t a t i o n
S e l e c t s t a t i o n
Using Menu-Up/Menu-Down buttons you can browse through
the available stations. Press OK button to select the desired
station.
You will see that the status shown in the LCD will change to ‘Connecting…’, which indicates that the
Lisa is trying to connect with the selected station. When the connection succeeds the status will change
to ‘Buffering…’, indicating that audio data is being streamed to the Lisa. The connecting and buffering
time take up to about 10 seconds.
No audio is sent to the output yet. This is related to the advanced buffering techniques that the Lisa uses
to ensure that variations in the transfer rate do not affect the audio output.
M e t a d a t a h e r e
M y S t a t i o n
After a few seconds, the Lisa will start playing the stream and
you will hear audio coming out of your audio installation. The
station name with a speaker animation in front will be shown on
the lower row of the LCD, while on the upper row metadata of
the audio stream when available.
If a stream is playing and you want to switch to another station, just browse to the desired station using
Menu-Up/Menu-Down and press OK button to connect. When you do not press OK, the Lisa will
automatically connect to the station after 10 seconds. If at the last moment you decide not to change
station, just press Escape to return. The preset buttons can be used to jump to any of the first five
stations in the list.
Using a task (see
Using a command, for example via
or the monitoring server (see
control from monitoring server
). See
Controlling the Lisa with commands
3.7
Playing from card
The Lisa also can play audio from an SD card. Fill the card with your favorite music and plug it in the
card connector. See
for details on how to place content on the card.
There are several options to make the Lisa play a playlist from the card:
On the device itself:
1 .p l s
S e l e c t p l a y l i s t
When playing from internet, you can switch to card by using the
Alt button (the opposite is also possible); on the lower row of
the LCD, the text “Select playlist” is shown, while on the upper
row, the name of the playlist.
Use Menu-Up/Menu-Down to browse the available playlist and press OK to select the playlist you would
like to play (When you do not press OK, the Lisa will automatically switch to the card after 10 seconds).
The Lisa will start to play the first entry of the chosen playlist.
