Lisa LCD
30
You can turn the Keylock OFF from the [Keylock] menu
as follows.
Enter the [Setup] and browse until you find the [Keylock]
option and press OK. This menu is locked, so you are
asked to enter the PIN code to access this menu. Once
you have entered the right PIN, press OK button to
confirm your entry and unlock the Keylock menu.
You have now accessed the [Keylock] menu where you
could choose between the two available options;
[Keylock OFF] or [Keylock ON].
Press OK to the [Keylock OFF] option. This will start a
wizard. In the first step of the wizard you are informed
that the old PIN is needed to turn OFF the Keylock.
Press OK to continue with the next step. Enter the old
PIN code and press OK to confirm your entry.
When the entered PIN is correct you will be informed
that the Keylock is now turned OFF. Press OK to
confirm and complete the wizard. The changes are now
applied to your device.
You can also exit the Keylock wizard without any
changes being applied by pressing Escape button.
4.10.3
Forcing keylock off
If you forget your PIN code, you can use the master PIN 1242 to recover. Otherwise, the
must be used to force the Keylock OFF.
4.10.4
Changing the keylock PIN code
There is no way to directly change the Keylock PIN code of the Lisa. If you want to change the PIN, you
will have to perform two steps:
1. Turn Keylock OFF. You can do that as explained in
. From this moment the old
PIN has expired.
2. Turn keylock back ON as explained in
