2. Getting started
2
Getting started
2.1
First and foremost...
thank you for purchasing the Streamit Audio Streamer (SAS220). We greet you as a new user and hope
that your new device will give you many years of pleasure. The SAS220 is a modern device and we
strongly recommend you to read this user manual thoroughly, before you start installing and using the
device for the first time.
The SAS220 is a fully autonomous working IP-audio streamer, able to encode audio in Ogg Vorbis or
MP3 format and stream to SIR and Lisa internet radio devices or to an Icecast2 audio distribution
server.
The SAS220 can be configured via the web-interface, implemented as part of the Streamit device portal,
but also via network interface (Telnet) and the Streamit Terminal Program(STP).
Streamit device portal (
) is a webservice that helps users to configure
and monitor their Streamit devices, straight out of the box.
STP is a user-friendly software application for your Windows PC, meant for advanced configuration and
monitoring of your Streamit devices. This program can be downloaded from the Streamit website free
of charge.
For more information on Streamit products and technologies, we invite you to visit our website
Finally, we wish you a lot of pleasure using your SAS220 device.
Streamit B.V.
2.2
Streamit support
With this user manual we have tried to clearly describe the operation of your SAS220 device. But we
can imagine you have a question or come across an issue which is not covered in this user manual. In
such case, you are welcome to visit our support website (
), where you will
find knowledgebase material, documentation and contact options for the support staff.
When you have purchased your SAS220 device from one of our local dealers, we recommend you contact
your dealer first.
2.3
Unpacking your SAS220
Carefully take the device and the supplied materials out of the package. Make sure that all of the
following components are included:
•
1x SAS220 device
•
1x 12V power supply with screw-on connector
•
1x USB-AB cable
•
1x SAS220 - Quick Start Guide
Version 1.3
28/10/2015
3 of 21
