STREAMIT INTERNET RADIO
User’s manual
May 2008
Version 1.0
11
E
N
G
L
IS
H
2.4.1 The Configuration Wizard
Step 1: Language setting
As default the wizard will start with [English]. Press OK to
confirm the language preference (in this case [English]). You
could also choose between [Dutch] and [German] by using the
menu up/down buttons.
Step 2: Network setting
It is possible to set your SIR radio to get its IP address from a
DHCP server or to use a Static IP and manually enter the
network settings. We recommend DHCP is used (when
available) which is also default in the wizard. Press OK for the
[DHCP] option; this will ensure that the IP address of your SIR
is unique. The scenario of using Static IP will be covered later
in §2.4.4 .
Step 3: Volume setting
The output volume level of your SIR radio is represented in
numerical format as 0-31 with a change step of 1. The
numerical value 0 corresponds to the minimum volume level,
while 31 to the maximum. As it will be explained later, it is not
possible to change the volume level of the SIR while it is
playing but only from the setup menu. This is the reason we
recommend to set the volume to the maximum (32), which is
also the default value, while you can control the actual “heard”
volume from the audio equipment the SIR is hooked to. Menu-
Left and Menu-Right are used to decrease and increase the
volume respectively. Press button OK when ready.
Step 4: Bass setting
It is also possible to set the bass output level of your SIR
radio, which is numerically represented from values 0-16 with
0 as the minimum and 16 as maximum. We recommend the
default value 8 is used. Menu-Left and Menu-Right are used to
decrease and increase the bass respectively. Press OK button
when ready.
Step 5: Treble setting
Same as for the bass, the treble output level is represented
with numerical values 0-16 and as default is set to 8. Menu-
Left and Menu-Right are used to decrease and increase the
treble respectively. Press OK button when ready.
Step 6: Keylock setting
Your SIR radio features a keylock option, which you have
guessed right enables you to protect the settings of your
device from being altered from other individuals. The default
keylock feature is OFF. Press OK button to complete the
wizard. The scenario with keylock turned on is covered below
in §2.4.5.
Congratulations! You have completed the SIR startup wizard.
The device will automatically restart and the wizard settings
will be set up as default. On start up your SIR will connect to
the selected database and load from there an up to date
stations list (and other settings when available).
