K4
Changes in models reserved.
Dimensions not binding!
Safety Information
Safety Information
-
Every person who is intending to operate this boiler is obligated to
read this manual carefully,
especially the safety instructions. This includes indivi-
duals which are cleaning or maintaining the boiler.
Otherwise, the legal warranty expires.
-
Please keep and preserve this manual.
Warranty and Liability for Defects
STREBEL provides a warranty on the boiler
K4
for the period of 24 months from the product commis-
sioning date. Within this warranty the manufacturer agrees to remove the defects of the product in
the form of a repair free of charge.
In order to recognize the warranty the manufacturer requires:
-
commissioning of the
K4
condensing gas boiler by an authorized servicing organisation
contracted by the manufacturer. This firm is obliged to send a notification on commissioning
of said boiler in writing to the manufacturer not later than 20 days upon commissioning to
the following address:
Strebel Ltd. Unit 10, Invincible Road,
Farnborough, Hampshire, GU14 7QU UNITED KINGDOM
Fax: +44 (0) 1276 685 405, Mail: info@strebel.co.uk
-
in accordance with act no. 458/2000 Coll. “on the Conditions for Doing Business and
Exercising State Administration in the Energy Sectors and amending certain acts
(the Energy Act) and
Č
SN 38 6405 change 1 5/99, EN 1775 to inspect the gas boiler on
a regular basis once a year. The inspections can be performed only by a contacted servicing
organisation authorized by the manufacturer, i.e., by STREBEL Ltd. This firm is obliged to
record and document on the implemented warranty and after-warranty repairs and on the
execution of the regular annual inspections of the boiler in the annexure to the warranty
sheet in this manual.
Each defect must be reported immediately after its detection, always by phone as well as in a
written form. A failure to meet the specified instructions must result in cancellation of the warranty
by the manufacturer.
The warranty does not apply to:
-
defects caused by improper assembly and improper attendance of the product and defects
caused by improper maintenance, see chap. 7;
-
defects caused by failure to observe the instructions specified in this manual including by
failure to observe water quality in the heating system;
-
product damage in the course of transport or another mechanical damage or unsuitable
storage (for example water);
-
consumables, i.e. electrodes, water/gas seal and fuses.
-
defects caused by natural disasters or force majeure.
The manufacturer reserves the right for changes performed within the product innovation process
which are not necessarily contained in this manual.
3