84
December
2017
880017
‐
4
7.
If you receive an error message or the Putty window immediately closes, power cycle the
ESR-Auto Plus and attempt to open Putty again. If this step fails, proceed to the ESR-Auto
Plus Troubleshooting Steps.
8.
Initiate a print out of data from the ESR-Auto Plus. The data printed on the ticket should
also display in the Putty window similar to Figure 18.2.
9.
If no data is displayed in the Putty window power cycle the ESR-Auto Plus and attempt the
test again. If this step fails, contact Streck Technical Service.
Figure 18.3
Figure 18.4