Basic operation description
1.
Automatic Recording
When you start your vehicle the DVR is automatically started and the
recording commences, the REC indicator on the screen will blink and
the REC light will flash to indicate recording status.
[Note] If the camera detects an error with the memory card or fails to
detect the rear camera the front camera will emit a series of warning
beeps to notify of an error, check the camera display for any relevant
notification messages.
At power off the DVR will automatically save the current recording
and will power down. The recordings are saved according to the
setting chosen in the loop recording menu. As the card reaches
capacity the oldest recordings are automatically deleted to allow
recording to continue seamlessly.
[Note] Any event files that are recorded, whether automatically
locked by the G-Sensor or manually locked are moved to the RO (read
only) folder and are not overwritten during the normal loop recording
process.
2.
Manual Recording
Press the <
POWER
> key, the DVR will power on and begin recording
automatically. Press and hold the <
POWER
> key for 5 seconds, the
DVR will save the recording automatically and will then power off,
manual power off is only available from normal recording mode
when using the 2 wire cig power supply.
Summary of Contents for SG9663DCPRO
Page 1: ...Digital video recorder SG9663DCPRO User manual ...
Page 4: ...Camera layout Overview ...
Page 19: ...camera Accessories ...