5
[Note] The rear camera is cabled to the front camera unit, ensure
cable alignment and orientation is correct before attempting to
connect any cables, if the vehicles is fitted with SRS airbags care
must be taken not to inhibit the operation of these systems,
professional installation is recommended
1. Once a suitable mounting location is decided secure the DVR
mount bracket to the windshield using the provided 3M adhesive
tape, ensuring the window is clean prior to application, remove
the backing tape and press and hold the bracket firmly against
the glass for 2 minutes, then wait 20 minutes before attaching
the camera. The adhesive will achieve 50% bond after 20
minutes, 100% bond is achieved after 72 hours, if the camera is
attached to the bracket too soon after installation the adhesive
may not bond correctly to the glass.
2. Fix the power, rear camera, and GPS cables properly using
cable clips (if required) and route all cables across the passenger
side, preventing the line of sight from being affected.
