6
3. Insert the charging interface of the in vehicle charger into the
USB interface of the DVR.
4. Connect the GPS and position the cables accordingly, the GPS
should be mounted with the adhesive side to the windscreen so
that the antenna is oriented correctly, for best performance do
not locate the GPS too close to the main camera unit,
maintain at
least 15cm separation between the camera and GPS antenna
.
5. Insert the in vehicle charger into the cigarette lighter socket of
the vehicle, if using the optional SGDCHW hardwire kit consult
the SGDCHW manual for further details
6. Adjust the angle of the DVR lens ensuring that the camera lens
is aimed slightly down from the horizon (40% sky, 60% road), this
will improve the results of the auto exposure function.
7. Ensure a suitable memory card is correctly installed and has
been formatted in the camera before use.
[Note] Video performance is adversely affected if the window is
not kept clean, ammonia free automotive glass cleaners are
recommended for the inside glass surfaces for optimum results.
Settings
The DVR is preset with logical default settings and is ready to
operate, when powered on the internal capacitors will charge,
the DVR will then power up and recording will commence, the
