7
time and date settings are automatically updated via GPS (if
fitted) and will sync periodically to maintain accuracy, the time
zone will need to be configured to your specific region to ensure
correct operation.
[Note] The DVR does not contain a battery and will need to be
connected to a power source to configure settings.
Adjust the time zone settings, press the
REC
key to stop any
active recording, then press the
MENU
key to enter the
SETUP
submenu, press the
Mic/pg down
key to scroll down to the
TIME
ZONE
menu, press the
OK/lock
key to enter and adjust
accordingly.
[Note] The GPS signal carries time and date information for GMT
0, the time offset to suit your region is set by the DVR, if you are in
a region that supports daylight savings offset it will be necessary
to adjust the time zone at the beginning and end of the period
accordingly.
Australian Consumer Electronics Product Warranty
Congratulations on Your Purchase, this product is warranted
against faults in material and manufacture for a period of two
years.
If Warranty is required during this period, please contact your
place of purchase to arrange a Return Merchandise
Authorisation, (RMA). The repairs/replacement will be carried out
