Firmware update instructions
Any updated firmware will be made available on the downloads
section of our website
https://support.streetguardian.info/downloads
To update the firmware the process is as follows
• Extract the zipped firmware file downloaded from our website
• Delete any files from the memory card
• Copy the firmware SG9663DR.bin file to the empty memory card
(Linux/Chromebook users rename file to SG9663DR.BIN)
• Insert the card to DVR (note, cameras must be connected to main
unit when updating)
• Connect to power, do not disconnect power at any time during
update process
• DVR will power on, screen will remain blank while updating
• Once update has finished DVR will startup as per normal
• Stop any active recording
• Enter settings menu and format the memory card
• Enter settings menu and reset default settings
• Any personalised settings will then need to be re-entered
• Ensure time is synced from GPS before use
• Process is complete
Memory cards can be reset and checked for errors by doing a full
overwrite erase using SDFormatter,
http://bit.ly/SDformatter
[Note]Memory cards must be formatted in the DVR before use!
Summary of Contents for SG9663DR
Page 1: ...Digital video recorder SG9663DR User manual ...
Page 4: ...Camera layout Overview ...
Page 15: ...camera Accessories ...