further description
Camera
– SG9663TD Full HD front camera
Mount bracket with 3M adhesive
– used for installation of camera
to window and allow camera to detach.
Mount bracket with suction mount
– used for installation of camera
to window and allow camera to detach.
Low profile mount bracket with 3M adhesive
– used for installation
of camera to window and allow camera to detach.
12v~24v power cord
– Approved power supply to suit, use of non-
approved power supplies may damage your camera and could void
warranty.
Android compatible memory card reader
– USB card reader for SD
and Micro SD memory cards, may also be connected to supported
Android mobile phones and tablets to access files directly from the
memory card.
Windscreen cleaning wipe
– Used to clean the window prior to
mounting the brackets to ensure a good bond for the 3M tape,
surfaces must be clean and dry prior to application.
Trim pry tool
– Helpful during installation to lever interior trims to
run cables.
GPS interface cable
– interface cable required for the GPS.
Cable clips
– May be useful in some installations to secure wiring,
note that the adhesive is not suitable for use on plastic surfaces.
Audio recording warning stickers
– Some locations require all parties
to be notified of audio recording (check local laws). Audio may also
be turned off in the menu or via long press of the <
MENU UP/PLAY
>
key when recording.
Summary of Contents for SG9663TD
Page 1: ...Digital video recorder SG9663TD User manual ...
Page 4: ...Camera layout Overview ...
Page 18: ...camera Accessories ...