This document contains proprietary and copyrighted information subject to change without notice. The information in this
document shall not be duplicated, used, or disclosed in whole or in part outside of MAI Media Group © 2015. Any distribution
of this material without the written consent of MAI Media Group is strictly prohibited.
2)
Insert the SD card into the unit
3)
Connect the cable and attach on windshield
4)
Connect to power source to turn on the product
5)
Adjust the camera angle
6)
Check LED lamps
7)
Arrange wires using wire holders
*
Connect the optional rear camera.
1) Connect the bracket to the main body
- Assemble the mounting bracket with the main unit and push it to the direction 1 to secure
the lock. You will hear a solid click sound when the main unit is locked to the attachment
bracket.
- Move the bracket to direction 2 to release the bracket.
2) Insert the SD card into the unit
- Insert the SD card as shown in the picture.
- When ejecting the SD card from the unit, turn off the main power completely and wait for
all indicator lights to go out and then push in the SD card. The SD card will pop out when
pushed in.
Use of force or other methods to eject the SD card may damage the SD card or recorder.
3)
Connect cable and attach to the windshield
