This installation guide provides detailed instructions for
installing the StreetEagle Vehicle Tracking Unit (VTU).
These instructions must be followed precisely to insure
correct operation of the GPS Tracking unit and to ensure
warranty coverage of the equipment. Please call
StreetEagle Support at (866)658-1191 if you require
assistance.
GPS Tracking Kit Equipment
•
StreetEagle VTU
•
Wiring harness
•
Installation Instructions and Activation Guide
Required Tools and Supplies
•
Crimpers and the appropriate connectors
•
Fuse taps
•
Drill with screwdriver and bit attachments
•
Cable ties or self-adhesive tie mounts
Installation Procedures
1.
Record the IMEI number -
This 15-digit number is
located on the bottom of the tracking unit and also found on
the activation guide. You will need this for testing.
2.
Find a suitable location and mount the VTU
–
The VTU should be mounted in the dash, unobstructed by
metal and with a direct line of sight to the sky.
Please
ensure that the VTU’s GPS Side is facing the sky. This
is marked by a sticker on the VTU, showing “GPS THIS
SIDE UP”.
3.
Connect the Wires to the Vehicle
- Use the wiring
harness provided with the installation kit.
DO NOT PLUG
THE POWER CABLE INTO THE VTU AT THIS TIME!!
Connect the wires according to the following table:
* See Wiring Diagram for details
4. Optional
Connections -
Connect GREEN input
for notification of vehicle alarm activation. Connect BLUE
output connection for remote door unlock. Connect the
YELLOW output connection for starter disable. Connect
the PURPLE input for Driver security alert. Note that the
output signals are active ground and the input signals
are active high (+12V). Relays may be required for
correct operation. See Wiring Diagram for more details.
5.
Connect the power cable to the VTU -
with the
ignition off, attach the power cable to the VTU. The
retaining clip will snap into place when the connector is
properly seated.
Black Ground
White Ignition
(Accessory)
→
12v is supplied only when ignition is on
Red Battery
→
12v is supplied constantly, regardless of ignition state
Green
Optional alarm monitor*
Yellow
Optional ignition disable*
Blue
Optional door unlock*
Purple Optional
Driver Security Alert*
