How to Turn On The Digital Air Compressor
To turn on the Streetwize 12V Digital Air Compressor with LED Light, simply connect the unit‘s 12V DC plug into your
vehicle’s 12V socket. The unit will turn on by itself once your vehicle is switched on.
Please note, when you turn on the unit, the built-in LED light will also come on by itself as well.
How to Select Which Pressure Unit to Use
The Streetwize 12V Digital Air Compressor with LED Light measures air pressure readings in PSI, BAR, kPa and
kg/cm
2
. The following shows you how to select your pressure unit.
Turn on the compressor unit as mentioned in the previous section.
To select which pressure unit you want to use, simply press the “R” button and this will change the pressure unit.
Keep pressing the “R” button again until your preferred pressure unit appears on the screen.
Please note, when the compressor is turned off, you will need to select the pressure unit again by following the
above steps in this section.
How to Check Tyre’s Air Pressure
Please note, for checking the tyre’s air pressure in cars, vans, motorcycles and bicycles, an adaptor will not be required.
The air hose pipe’s trigger lock should fit on the tyre’s valve.
1. To check tyre pressure, connect the air hose pipe to the tyre’s valve and use the trigger lock to secure it in place.
2. Turn the compressor unit on and select which pressure unit you want to use to measure the pressure.
3. Once the pressure unit has been selected, the current air pressure will appear on the LCD display.
4. To disconnect the air compressor from the tyre, release the trigger lock to remove the air hose pipe from the tyre valve.
How to Inflate with the Streetwize 12V Digital Air Compressor
with LED Light & Auto Shut-off
The Streetwize 12V Digital Air Compressor with LED Light has been designed to be easy to use. To inflate with the
compressor unit, please follow inflation instructions below:
1.
Select the appropriate nozzle adaptor for the inflatable object that you want to inflate. For inflating tyres on cars,
vans, motorcycles and bicycles, an adaptor will not be required. The air hose pipe’s screw on connector should fit on
the tyre’s valve.
2.
Ensure the air hose pipe is securely fastened to the compressor unit. If a nozzle adaptor is required, ensure this is
securely fastened to the air hose screw on connector.
3.
Secure the screw on connector to the valve of the tyre or inflatable object that you want to inflate.
4.
Turn on the compressor unit and select the pressure unit you want to use (see previous sections).
5.
When you have selected the which pressure unit you want to use, use the “+” or “-” buttons to set the desired air
pressure you want to achieve. If you want to return to the default pressure setting, press both “+” and “-” together.
The default pressure set is 30PSI.
6.
Once the air pressure has been set, turn the “O/I” switch to “I” and this will commence the inflation.
7.
When your desired pressure has been reached, the compressor unit will automatically stop inflating.
8.
To re-inflate, simply turn off the switch and turn on again.
How to Replace The Fuse
The Streetwize 12V Digital Air Compressor comes supplied with a replacement fuse. To replace the fuse, please see the
instructions below:
1.
The fuse for this air compressor is located inside the 12V plug. Before replacing the fuse, please make sure the
compressor is fully cooled down. Never replace the fuse when the 12V plug is hot.
2.
Once cooled down, unscrew the tip of the 12V plug to access the fuse.
3.
Remove the old fuse and replace it with the replacement fuse
4.
Screw the tip back onto the 12V plug.
