1
A
Im
1.
2.
3.
4.
5.
6.
7.
8.
9.
10
11
N
C
C
To
1
2
3
4
5
6
Operating Lights
1. Locate the button on the side of the unit and
press the button up marked “FLASH” for
flashing RED light.
2. Press the button down marked “LIGHT” for the
steady RED light. If a WHITE light is required
the RED plastic lens can be removed.
Simply snap back into place when finished.
TROUBLE SHOOTING
Compressor does not start/blows fuses
1. Push the power plug firmly into the 12V power socket and twist it back and forth.
2. Check receptacle and plug terminals for dirt, particularly tobacco. Use a non-conductive probe,
not fingers or metal.
3. Check 12V power socket fuse. This should be 15 amps minimum.
4. Power cord unplugged.
Compressor runs but does not inflate
1. Be sure the air hose connector is screwed on to the tyre valve stem as far as possible.
2. Check article for leaks.
3. Check hose for breaks and leaks at fittings.
Compressor runs slowly
1. Overheated from excessive use. Unplug power cord and leave it to cool for 30 minutes.
2. Voltage too low. Check condition of battery providing the power.
For other inflatables
1. Select the suitable adaptor (A & B for Inflatables & C for sports balls)
and screw into the air hose adaptor.
2. Check the owners manual for exact inflation pressures. Others are:
3. Insert adaptor into article to be inflated.
4. Plug power cord into 12V power socket receptacle.
5. When correct pressure is reached unplug power cord.
6. Remove adaptor from inflated article. Remove adaptor from connector.
7. Always check item being inflated with Streetwize pressure gauge.
Avoid excessive pressure in low pressure objects.
M17 1RY
Streetwize Accessories:
Unit 1, Royce Trading Estate, Ashburton Road West,
Trafford Park, Manchester M17 1RY
Sales enquiries:
sales@streetwizeaccessories.com
Technical enquiries:
support@streetwizeaccessories.com
www.streetwizeaccessories.com
A
B
C
SWAC3-Manual.qxp_Layout 1 09/03/2018 17:56 Page 1
