INSTRUCTIONS FOR USE
• Pull the textile polishing cap over the
polishing pad. The pads are designed
to fit tightly, it is essential that time
is taken to fit the pad correctly.
• Switch the polishing machine
on and off only when the
polishing machine is resting on
the polishing surface.
• Place the extension lead over
your shoulder and work first on
the large. Fiat surfaces such as
the bonnet, boot lid and roof.
Keeping your movements as
regular as possible.
• Spread the polishing paste
over the polishing pad. Do not
apply the polish directly to the
polishing surface.
IMPORTANT SAFETY PRECAUTIONS:
IT IS ESSENTIAL TO ENSURE THE POLISHING & BUFFING CAPS ARE
COMPLETELY CLEAN AND FREE FROM
ANY
DIRT OR GRIT.
ALLOW THE POLISHING MACHINE TO GLIDE OVER THE POLISHING
SURFACE. DO NOT EXERT PRESSURE!
• Wash the polishing cap only by hand and hang up to dry.
• When not in use, remove the polishing cap and store the polishing
machine upside down so that the polishing pad can dry and retain its
original shape.
• The excessive use of wax and paste can cause the polishing cap to jump
off the polishing pad while polishing.
• Use only a mild soap and damp cloth to clean the polishing cap.
IMPORTANT! DO NOT USE ANY ABRASIVE POLISHING AGENTS
• For optimum paintwork protection, you should polish your car 2 to 3 times
per year.
• Wash your car at least every 2 weeks. Avoid using household detergents
as these can damage the paintwork and remove the layer of wax.
• Wash your car with a clean sponge, working from top to bottom.
• Remove all insects, bird droppings and tar stains from the paintwork
daily.
• If you use any window-cleaning agents, spray them onto a cloth and not
directly onto the windows in order to prevent them wetting the paintwork.
Voltage:
Power Rating:
Speed:
Polishing Pad:
240V
120W
3500rpm
240mm-diamiter
MAINTENANCE AND CARE
CARE TIPS
TECHNICAL DATA
