background image

Dual Rechargeable Light Stream

ULTRA BRIGHT LED LIGHT STREAM WITH BUILT-IN HOOKS AND MAGNETS FOR SUSPENSION

READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT. RETAIN THIS OWNER’S MANUAL FOR FUTURE REFERENCE. 

SAFETY WARNINGS 

• Do not allow children to operate this Rechargeable LED Work Light. 
• Do not use this for other purposes than its intended use. 
• Do not use when the charger is plugged in.
• Never operate if any part of it is corroded or damaged. 
• Never submerge in water. 
• Never charge the Rechargeable LED Work Light around water (including rain), fire or explosive hazards 
• Never operate near flammable materials or any location where flammable fumes may accumulate. 
• Never allow the Work Light to be exposed to fire, direct flame or high-heat sources.
• Always turn off when not in use. 
• Do not disassemble or remove any parts. This Rechargeable LED Work Light contains no user serviceable or replaceable parts. 
• Clean the Work Light and charging accessories regularly. 

FEATURES 

• Contact Pins 7. Charging Port 
• 120 LEDs
• Red LED Charging Indicator
• ON/OFF Switch
• Fold-Out Hooks
• Magnets 
• Coupler
• 12-Volt DC Charging Adapter
• 2-amp Fuse

• 230-Volt AC Charging Adapter
• 700 Lumens
• Run time per charge (120 LED bulbs) 2.0 hours 
• Battery 74-volt Li-Ion, 13.32 Watt-Hours 
• Charge time AC charger — 5 hours; DC charger — 5 hours 
• AC charger Input 230-volt; output 12-volt 300 mA 
• DC charger Input 12-volt; output 12-volt with 2A fuse 
• LEDs 120 white LEDs and 1 charging LED 

CHARGING

 

This Rechargeable LED Work Light is shipped in a partially charged state. BEFORE first use, charge the battery using the 230-volt AC charging adapter 

for 5 hours. Failure to follow this procedure may permanently damage the battery. 

CHARGER FEATURES 
The 230-volt AC charging adapter allows charging from a household wall outlet (230 volts AC) and connects to the charging port at the bottom of the 

handle.

The 12-volt DC charging adapter allows charging from a 12-volt DC power socket and connects to the charging port at the bottom of the handle. 
A red LED charging indicator is next to the 120 LED lights, and whilst charging the red LED charging indicator will be illuminated. When fully charged 
the indicator will turn green. 

CHARGING GUIDELINES AND PRECAUTIONS 
• Only use the charging adapters that were provided with this Rechargeable LED Work Light. Use of other chargers or adapters may void any warranty, 

cause product damage, increase risk of fire, and/or result in personal injury. 

• Keep the charging adapters dry and free of dirt/dust at all times. Do not submerge them in water or any liquid. 
• Do not overheat or overcharge the battery.  
• NEVER turn on while charging as this may damage the Work Light and may void any warranty.
•Once the battery is discharged, recharging will take 5 hours with the 230-volt AC charging adapter to reach full charge. 
•Do not charge the battery for more than 24 hours.
• Ensure the power switch is set to the OFF position. 
• Connect the AC charging adapter to the Work Light charging port and then plug into an approved outlet. The indicator will illuminate whilst charging: 

Ensure adapter connections are secure. 

• When the Light is fully charged, the red LED charging indicator will turn green.
 
12-VOLT DC CHARGING 
Be sure the 12-volt DC power socket and 12-volt DC charging adapter power plug are clean before connecting the 12-volt DC charging adapter. Corro-

SWLR31  

Dual Rechargeable Light Stream   

Owner’s Manual & Warranty Information

Reviews: