DTC: 02
IM: YES
7. Select “DTC” from the main menu by pressing the ENTER button.
MENU:
1.DTC
●
If there are no Diagnostic Trouble Codes retrieved, the display will indicate
“NO CODES”.
NO
CODES
●
If there are any Diagnostic Trouble Codes, then the total number of the Fault Codes
followed by that of the Pending Codes will be reported on the display.
FAULT:02
PEND:02
8. Read the Diagnostic Trouble Codes by pressing the SCROLL button.
●
The rst code number will appear on the rst line of the LCD display, the numerical
sequence of the code and the total number of the codes stored will appear on the
second line. To view additional codes, press the SCROLL button to scroll, as necessary,
until all the codes have been shown up.
P0101
01/04
●
If the code retrieved is a pending code, a “PD” will show on the LCD display in the
end.
P0005 PD
01/05
●
To view previous codes, press the SCROLL button to scroll through to the end, and
then start from the rst of the list.
9. Look up part 5 for Diagnostic Trouble Code Denitions. Match the retrieved DTC(S)
- 8 -
