LIGHTING
- Press the ON / OFF switch to turn on the light.
A display appears on the display to indicate that
the light is on.
- Press the ON / OFF switch to turn off the light.
The sign indicating that the light is on on the
display goes out.
FOLDING/OPENING
Make sure that the power of electric scooter is turned off, open the folding mechanism, put down the pipe
and hook the handlebars onto the rear fender. When opening you need to press the hook at the rear fender,
until the handlebars can be released, then unfold the electric scooter.
TRANSPORTING
After folding, hold the pipe with one hand or both hands to carry it.
MAINTENANCE
- Clean the electric scooter with a soft cloth. If dirt cannot be removed, use a soft cloth moistened with soapy
water. Never use cleaning agents or solvents such as benzine, alcohol, ammonia, etc.! These solvents can
damage the plastic parts of the product.
- If scratches appear on the plastic parts of the electric scooter, polish them.
- Do not use a high-pressure cleaner to clean the electric scooter.
- Make sure the scooter is turned off during cleaning.
- Do not charge the electric scooter during cleaning. Make sure the rubber cover of the charging port is
installed in place, as water ingress can damage the electric scooter or cause electric shock.
- Keep the electric scooter in a cool, dry place when not in use.
- Do not store the electric scooter outdoors for long-term storage. Excessive sunlight, excessive or too low
temperatures promote tire aging and reduce the life of the electric scooter and battery.
Battery maintenance
- Use only original batteries approved by the manufacturer. The use of other models or brands may affect
safety.
- Do not touch the contacts. Do not disassemble or remove the battery cover. To avoid short-circuiting, avoid
