colectare. Se pot impun
e sancțiuni pentru eliminarea incorectă
a acestui tip de deșeuri în conformitate cu reglementările
naționale.
ENGLISH
LED HEAD LAMP
DESCRIPTION OF THE DEVICE
- LED head lamp comes equipped with a large light distance ideal
for home improvement projects, hiking and other outdoor
activities.
TECHNICAL PARAMETERS
LED HEAD LAMP
POWER INPUT
10 W
LIGHT SOURCE
XHP 70
LIGHT INTENSITY
100% 2 000 lm
50% 1 000 lm
LIGHT DISTANCE
300 m
COLOR TEMPERATURE
6 500 K
LIGHT PERFORMANCE AT
FULL POWER
2,5 h
COVERAGE
IP43
PROTECTION CLASS
III
ENERGY CLASS
A+
MATERIAL
Aluminium
DIMENSIONS
250 x 200 x 90 mm
WEIGHT
230 g
BATTERY
VOLTAGE
3,7 V
CAPACITY
3 x 2 000 mAh
CHARGING TIME
approximately 5 h
EXPLANATION OF SYMBOLS
The product complies with the applicable
European directives and the conformity
assessment method of these directives
has been implemented.
Degree of protection IP43
Read the instruction manual.
Protection class III.
Do not dispose of as normal household
waste. Instead, contact your recycling
center in an environmentally friendly way.
Please take care of environmental
protection.
A financial contribution has been made for
the recovery and further recycling of the
container.
Packaging materials are recyclable. Please
do not dispose of the packaging material in
your household waste, but hand it in at the
secondary collection point.
This work light contains built-in light
sources.
SAFETY INSTRUCTIONS
- Before use, read the entire instruction manual and keep it with
the product so that the operator can become familiar with it. If
you lend or sell the product to someone, please also enclose this
user manual with the product.
- The manufacturer is not liable for damages or injuries caused
by the use of equipment that is not in accordance with this
manual.
- Before using the head lamp, familiarize yourself with all
controls and components.
-
The product is not intended for use by persons (including
children) whose physical, sensory or mental disability or lack of
experience and knowledge prevents the product from being
used safely unless supervised or instructed by the person
responsible for its safety to use the appliance. Beware of
children to ensure that they do not play with the product.
- This product is not a toy, it is not suitable in the hands of
children. Children cannot recognize the dangers of handling
electrical products.
- We recommend to fully charge the head lamp before the first
use.
- The product must be charged only with the included USB-C
cable.
- Pay attention to USB-C cable. Sharp edges and hot subjects can
damage it. Before the use please completely unwind the USB-C
cable.
- The head lamp battery must be kept charged to prevent the
voltage from dropping below the threshold. Due to this fact, we
recommend charging the head lamp light at least once every 3
months, even when it is not used.
- Charge the head lamp
indoors only at 5 ° C to 45 ° C.
- If the head lamp
doesn‘t
lit or is dim, charge it immediately.
- If the battery is damaged or destroyed during the warranty
period due to failure to comply with the above rules, the claim
will not be accepted.
- Do not use the product if you notice any damage.
- Do not throw into the fire or disassemble the head lamp.
- Protect the product from liquids and moisture. Never immerse
the product in water or other liquids.
- The LED cannot be replaced.
- Protect the product from strong heat and cold.
- Do not cover the head lamp while wearing it as there is a risk
of heat accumulating and the lamp igniting.
USAGE
SWITCH ON / OFF
- Press ON / OFF to turn on the work light.
- Press the ON / OFF button again to turn off the work light.
- Press the ON/OFF switch to turn the head lamp on (100%
intensity).
- Press the ON/OFF switch again to change lighting modes:
1: Head lamp shines with 50% intensity.
2: Head lamp flashes.
4: Head lamp shuts off.
CHARGING
- The product must be charged only with the included
USB-C cable.
- Be careful not to damage the micro USB cable on sharp
edges or hot objects. Unwind the USB-C cable completely
before use.
EN
