hoW To Use yoUr hydrogener8
™
Charging your Hydrogener8
™
1.
Remove the base cap and plug the charging
cable into the bottom of the device
(either USB or micro USB).
2.
Connect the charging cable
to a suitable power source.
The power indicator light will
flash while charging.
3.
When fully charged, the power
indicator light will stop flashing.
4.
Unplug the charging cable and replace
the base cap.
5.
When the power indicator light flashes,
recharge your Hydrogener8™
Filling your Hydrogener8
™
1.
Remove the protective cap by twisting
it to the left and pulling upwards.
2.
Open the rubber plug of
the water tank and fill with
mineral water using the
provided water refill bottle.
3.
Replace the rubber plug and
protective cap.
One tank
of water can
last 10 uses
5
