AUDACES
14
Chapter 5 Cartridges
5.1
Cartridge
models
The cartridge used in AUDACES is HP 51645A or HP 51645B. It can be
purchased from your supplier or the HP Company.
5.2 Ink level
The following figure (Figure5-1) shows the position of the ink level marker
on the cartridge. When the marker changes color from green to other colors, it
means that the cartridge is out of ink. Please replace the cartridge.
Figure5-1
5.3 Replacing a
cartridge
The cartridge can be replaced under two circumstances:
1. The plotter power status is ON. Under such a circumstance, click PAUSE
on the control pad to make the plotter paused. After that, open the cover of
the plotter, replace the cartridge, then close the cover and click PAUSE
again to make the plotter to be in the normal status.
2. The plotter power status is OFF. Firstly, switch on the plotter, plotter will
finish automatic cleaning print head process and then protect print head,
then open the top cover (please note that before open the top cover the
print head must stop steadily, otherwise, the plotter will alarm), the print
head will move slowly to the middle of the plotter, then switch off the plotter
and change the cartridge. Then close the top cover, switch on the plotter.
How to replace the cartridge: After cartridge stops steadily, lift the lock lever
on the cartridge holder, pull out the empty cartridge. Remove the nozzle
covering tape of a new cartridge carefully (Never touch the nozzle and the gold
contact points), install a new cartridge (Note: The insertion of cartridge must be
gentle, if you feel any resistance while pushing down the lock lever, stop.
Otherwise the cartridge may be damaged). Push down the lock lever of the
cartridge tightly, and close the top cover.
Inkout
indicator
Summary of Contents for AUDACES Jet Lux Plus
Page 2: ...AUDACES 2...
