AUDACES
20
The operation area includes:
<Plot>, <Stop>, <Pause>, <Continue>; <Directory>, <File>, <Merge>,
<Split>, <Stack>, <Up>, <Down>, <Delete>; and some auxiliary plotting
buttons: <Zoom in>, <Zoom out>, <Z+A>, <Eagle Eye>, <Bird's-Eye>,
<Enlargement>, <Box select>, <Pan>, <Measure>; and <Auto plot> tick box.
The window below the operation area is for
“Prepare files to be plotted”
(Figure6-1). <Plotting times> is used to change the plotting quantity of a same
file.
The directory of plotting files can be changed by selecting <Directory>.
Click<File> to add the file to be plotted, this file name will be displayed in
the dialogue window.
If click <Delete>, the current file which already be chosen will be deleted.
If click <Up>, then the current file which already be chosen will be move
up. The button plays a role to change plotting priority in the process of auto
plot.
If click <Down>, then the current file which already be chosen will be move
down. The action is similar to that of <Up> previously discussed; only the
direction is opposite.
First add the file to be plotted, and then click the file, the analyzed pattern
will be displayed in the window below. After select a file to be plotted, click
<Plot>, the file will be plotted.
Click<Merge> and box select several files, a new file will be created, which
can realize two files or more output simultaneously.
While the file size exceeds the actual print range, we can click <Split>,
change the file width in Setup
→
Plotter parameter
→
Other into each size
what you want to split. And you may also split by rotating 90 degree
as needed. (Note: The connections of the splitting have been
marked with different gap dot lines.)
<Stack> can stack several files into one file by center aligned methods. For
example, same model with different size can be stacked into one marker.
During the plotting, if click <Pause>, the plotting will be paused, and
<Pause> will become <Continue> in several seconds.
If click <Continue>, then the file will be printed continuously.
If the user hopes to stop printing, please click <Pause> first, and then click
< Stop>, the plotting file will be stopped; in this case, the plotted file won
’t
be deleted.
Summary of Contents for AUDACES Jet Lux Plus
Page 2: ...AUDACES 2...
