background image

EWS150 Configuration Guide

13

     EWS150 Configuration Guide

Monitoring Your Network

The EWS150 is equipped with a variety of monitoring features and a troubleshooting aid, all of which are
available from the Monitor tab in the unit’s Web Management Interface. In addition, there are several quick
links on the home page that will direct you to the key monitoring functions. The home page also includes an
Antenna Aimer, which allows you to monitor signal strength while manually directing the unit’s antenna (this
function is only available from the home page). Monitoring functions include:

Event Log

L2NAT

Troubleshooting

Wireless Neighbors

Statistics

Wireless History

Because the EWS150 monitors are intuitive and to avoid redundancy, this document does not provide
examples of all available monitors. It does, however, provide an example of the 

Troubleshooting

 window and

the 

Antenna Aimer

, which are unique to the EWS150.

Where monitors are in tabular form the table can be sorted by column by simply clicking in the column
header. For example, in Figure 12 (Wireless Neighbors) you may want to display the results sorted by RSSI
value. In this case, click in the RSSI (dBm) column header. To reverse the displayed order (descending instead
of ascending), click in the column header again.

Figure 12. Wireless Neighbors

Summary of Contents for EWS150

























Reviews: