background image

 

 

5

 

BA_170-22D_A14_180704_en

 

Every person in charge of setting up, operating, servicing and repairing the 
machine must first read and understand the operating instructions and 
particularly the safety instructions before starting up the machine. 

General notes on safety 

Failure to comply with the following safety instructions can lead to bodily 
injury or damage to the machine. 

1. 

The machine must only be operated by persons familiar with the relevant 
operating instructions and who have been instructed accordingly. 

2. 

Before commissioning also read the notes on safety and the operating 
instructions of the sewing drive manufacturer. 

3. 

Only use the machine in the intended manner and never without the 
provided guards. Always observe the pertinent safety regulations. 

4. 

Switch off the main switch or pull the power plug for threading, changing 
the reels, exchanging sewing tools such as needle, gripper, needle plate, 
transport devices, possibly cutter and cutting block, for cleaning and when 
leaving the workplace as well as for maintenance. 

5. 

General maintenance tasks may be carried out only by properly trained 
persons in accordance with the operating instructions. 

6. 

Repair work, retrofitting and maintenance may be carried out only by 
technicians or specially trained personnel. 

7. 

When servicing or repairing pneumatic equipment, the machine must be 
disconnected from the pneumatic supply. Exceptions are only allowed for 
adjustment work and tests of functionality performed by specially trained 
technicians. 

8. 

Only specially qualified technicians may work on the electrical equipment. 

9. 

It is forbidden to work on electrically live components! Exemptions are 
covered by the EN50110 (DIN VDE0105) regulations. 

10.  Any retrofitting or alterations to the machine may only be performed under 

strict compliance with all pertinent safety regulations. 

11.  Only use our approved spare parts when servicing and/or repairing the 

machine. 

12.  It is forbidden to operate the sewing head until it is determined that the 

entire sewing unit complies with EU provisions. 

13.  It is essential that you observe and follow these instructions as well as the 

generally valid safety regulations. 

Summary of Contents for 170-22D











































Reviews: