Safety Regulations
2 — 2
03_0018_0508GB
Use only machines in a technically perfect condition, as designated
and being conscious of safety and the dangers, taking account of
the Operating Instructions. Any faults, especially those affecting the
safety of the machine, must, therefore, be rectified immediately.
Make sure that
-- no safety equipment is removed, rendered inoperable or modified,
-- safety equipment removed for the purposes of maintenance work
is refitted immediately after the work is completed.
Check operational safety every time you start work. Any defects
found or suspected must be eliminated immediately. If necessary,
inform the project supervisor.
If defects or faults are found or suspected during operation, opera-
tion must cease immediately. Eliminate the defect or fault before re-
starting.
The following should be noted if you sell the machine on:
Pass on to the new operator all the accompanying documentation
(Operating Instructions, Maintenance Instructions, diagrams, ma-
chine cards, inspection certificates etc.) you received with your ma-
chine. If necessary, you may have to order the papers from us, quo-
ting the machine number. The machine may not be sold on without
the accompanying documentation under any circumstances.
Reporting
an
onwards
sale
or
acquisition
to
Maschinenbau Rudolf
ensures
that
you
will
be
sent
any
information
relating
to
modifications
or
in-novations
relevant
to
safety,
and
you
will
also
be
eligible
for
technical
consultancy
from
our
works.
2.1
Principle
Onwards sale