Safety Regulations
2 — 12
03_0082_0606GB
The control cabinet, electrical wiring and drive motor pose a risk of
fatal injury from electrical contact during the following:
-- Starting up
-- Operation
-- Cleaning, Troubleshooting, Maintenance
-- Decommissioning.
All
electrical
assemblies
are
protected
as
standard,
as
per
IEC
60204
Part
1
or
DIN
40050
IEC
144
in
accordance
with
protection
category
IP
44.
Use only original fuses with the specified amperage! The electrical
system can be destroyed by over-rated fuses or bridging.
High voltage
Work on the electrical system and equipment of the machine must
be carried out by a qualified electrician or by instructed persons
under the supervision and guidance of a qualified electrician and in
accordance with the electrical engineering rules and regulations.
2.10 Electrical contact