Operation
6 — 10
05_0187_0802GB
Clean the machine after finishing work. Clean the machine to
ensures that it will function correctly the next time it is used.
Environmental protection
Observe all applicable local waste disposal regulations when
performing cleaning work.
Do not allow cleaning additives to enter the sewerage system.
Prior to cleaning the machine, cover or seal all openings where
moisture should not enter for safety or operating reasons. Especially
at risk are electric motors, control cabinets and electrical plug
connectors.
Do not allow water to enter the electrical systems
Caution
Do not clean the control cabinet or the engine with pressurised
water.
Cover all openings prior to cleaning. For safety or operating reasons,
moisture must not be allowed to enter these openings.
Continued next page
6.6
Cleaning the machine
Information on cleaning