E L E C T R I C A L
Your
Strom-Electrical
water heater must be wired in accordance with all relevent electrical requirements
and local regulations at the time and in accordance with the latest IEE regulations.
Connection should be made via a 13A switched fuse spur.
The cable supplied with the electrical water heater should be of ample length, but in the circumstances
that it is insufficient we recommend removing the shorter length and replacing it with the correct length of
cabling, we advise against joining the cable at any point.
Always ensure your water heater is correctly earthed.
As previously recommended please ensure that you unit has been filled, correctly flushed, and all debris
and airlocks have been removed before turning your water heater on. By bypassing this step you risk
irreversible damage to your water heater that will not be covered by your warrenty.
Electrical connections can be made via an external time clock if required, this gives a greater deal of
control for the operating times of this unit.
H E AT E R S T R U C T U R E
Undersink Water Heaters:
SEUS6L
SEUS10L
SEUS15L
Oversink Water Heaters:
SEOS6L
SEOS10L
SEOS15L
Hot Outlet
Cold Inlet
Temperature Dial
Heating Indicator
Power Indicator
Hot Outlet
Cold Inlet
Temperature Dial
Heating Indicator
Power Indicator
4.
5.
