If it is not possible to de-energise the unit due to compelling reasons, e.g. when connecting the clutch, the oper-
ator must ensure that:
• the type of instruments or tools used in this work eliminate danger due to electric shock or arcing,
• such tasks are only assigned to personnel qualified to work on live parts,
• further technical, organisational and personal safety measures are determined and performed if required,
which ensure adequate protection from danger due to electrical shock or arcing.
2.14.3
IP protection classes
After all work that requires the protective casing to be removed or disabled, re-establish the protection class and
perform an operational check before reconnection.
2.14.4
Electromagnetic compatibility
The clutch has been constructed and marketed in compliance with relevant legal harmonisation regulations. It is
the operator's responsibility to ensure that EMC regulations for the complete machine are observed.
For any further questions or additional support required, please contact Stromag's Customer Care.
2.15
Safe handling with hot surfaces
The following safety guidelines must always be observed when dealing with hot surfaces:
• Before commencing any work, first allow the hot surfaces to cool down.
2.16
Environmental protection
The following instructions must always be observed in order to protect the environment:
• After the final decommissioning/disposal of the clutch, ensure that the individual components, as well as any
possible auxiliary and operating materials, are disposed of in an environmentally friendly way.
• Recycle all metal and plastic components.
10
Mounting instructions Electromagnetic multi-disc clutch EKE/EKB, EDE/EDB • No. 500-00000 C • 10/2017
Summary of Contents for EDB Series
Page 2: ......
Page 6: ...VI Montageanleitung Elektromagnet Lamellenkupplung EKE EKB EDE EDB Nr 500 00000 C 10 2017 ...
Page 54: ......
