12
Strong Enterprises owner’s manual. Para-Cushion
www.strongparachutes.com
4. Prepare Parachute for Packing
1.
Gather the appropriate tools.
2.
Always count your tools to ensure you don’t leave any in the packed parachute.
3.
Lay the harness, container and canopy down on the table with the harness facing down.
4.
Attach canopy apex to tension hook and attach container to tension plate. By tightening both
ends, canopy will be stretched out allowing easier inspection and packing.
5. Pre-Packing Inspection
Always perform the following inspection prior to packing:
•
Inspect the entire assembly for any damage.
•
Inspect pilot chute and bridle.
•
Check that the Larks-head knot on the pilot chute is secure.
•
Inspect Apex area.
•
Check over entire canopy for damage.
•
Inspect lines for damage.
•
Check line sequence and control lines.
•
Perform a complete suspension line continuity check.
•
Check the barrels on #6 rapide link for cracks.
•
Check that links are tight.
•
Inspect Harness and Container assembly.
•
Check that the elastic stow bands are in good condition.
•
Check tackings for tightness and condition.
•
Inspect Hardware for functionality and condition.
•
Inspect Harness for nicks, abrasions, and sun damage.
•
Check that ripcord is snug in pocket.
•
Check closing loop length. Loop should be 10” with a tolerance of (-) 1/4”
