14
First step is to connect the cable. Then you must start the channel scan. You can choose between
digital and
analogue channels, only analogue channels
or
only digital channels
. If you skip this step, the channel scan can
be done later by accessing the TV menu. Press
OK
for your selection.
On the
Scan Mode
menu you can choose to perform a full scan by selecting
Full
, while selecting
Advance
you
can perform a scan using the Frequency and Network ID data provided by your operator. Use the
OK
button
for setting the value and
to start the channel scan.
In the next step the channel scan started and will take some minutes to complete.
Scanning
The channel scan
may take a while
to complete.
Digital Channels: 0
Analog Channels: 0
Progress: 7%
Channel scan
First, please connect the cable.
Star the channel scan now?
If you skip this step,
the channel scan could
be performed in Menu.
Digital and analog channels
Only analogue channels
Only digital channels
Skip scan
Cable Scan Configure
Please configure the cable info.
Use “ENTER” key to seng value
and “RIGHT” key to next page.
Please tune to your country home
max transponder frequency.
Scan mode
Advance
Channel Scan Type
Only digital channels
Frequency (KHz)
474000
Network ID
5555